| |
|
|
Material and Application Guide
|
| |
|
Phone: (313)
429-LEVY |
|
Fax: (313)
429-2448 |
|
E-Mail: sales@edwclevy.net |
| |
| Material: |
|
Blast
Furnace Slag |
| |
|
|
| Product: |
|
M•DOT –
29A
(BF) |
| |
|
|
| Application: |
|
Coarse
aggregate for chip and seal road surfacing |
| |
|
|
| Description: |
|
An
open graded coarse aggregate, produced by crushing and screening air cooled iron Blast
Furnace Slag. A light brown to gray
crystalline aggregate, formed simultaneously with the production of iron in a blast
furnace. The particles are sized from
1/2” (12.5mm) to #8 mesh (2.36mm). |
 |
 |
|
29A
Blast Furnace Slag
|
|
| Specifications:
M•DOT |
| |
| 29A Blast Furnace Slag conforms to all the requirements of Michigan Department of
Transportation (M•DOT) “1996 Standard Specifications for Construction”, section 902 |
|
|
| U.S. Sieve |
1/2" |
3/8" |
#4 |
#8 |
LBW |
| Metric Sieve |
12.5mm |
9.5mm |
4.75mm |
2.36mm |
- |
|
Specification
|
100 |
90-100 |
10-30 |
0-10 |
3.0
max |
| General
Usage Guide: |
| |
| After
application of the asphalt emulsion, the 29A Blast Furnace Slag should be evenly spread
over the emulsion, followed by compaction to embed the aggregate particles. |
Field
Estimating Quantities:
| U.S.
Typical
29A Blast Furnace Slag requirements per 1 sq. yd. |
20
- 22 lbs |
| Metric Typical
29A Blast Furnace Slag requirements per 1 m2 |
11
- 12 kgs |
| Supply Location: |
| |
|
· Levy Plant #1 –
State Pit #82-19 |
| This information
is not to be taken as warranty or representation for which we assume legal responsibility
nor as permission or recommendation to practice any patented invention without a license.
It is offered solely for your consideration, investigation and verification. |
| |
| 36708a |
|
